All manuals and user guides at all-guides.com
Use the Preprogrammed Zone Switch
1
If a control on your radio has
been preprogrammed as the
Zone Switch, move the
Zone Switch to the position
for the zone you want.
Note: If the zone you selected
is unprogrammed, repeat
step 1.
2
Press h to confirm the
displayed zone and channel.
Select a Channel
Consult an authorized service technician for the right choice between
the following methods.
Method 1: Use the Preprogrammed Channel Selector
After the zone you want is
displayed, turn the
preprogrammed Channel
Selector switch to the
desired channel.
ASTRO XTS 2500 Model III
General Radio Operation
FIRE
UNPROGRAMMED
DISP NW
27