Table of Contents
Advertisement
Programming Mode
Channel
Description
Parameter
RXXX.XXXX
VFO Receive
Frequency
TXXX.XXXX
VFO Transmit
Frequency
OFS-XXX
Repeater Off-
set Frequency
RPT-XXXX
Repeater
Offset
Default
Range
from
Factory
Within the
R136.0000
band limits
of your
model
Within the
T136.0000
band limits
of your
model
OFS 000,
OFS 006
OFS 001,
(VHF),
É.,
OFS 050
OFS 100.
(UHF)
RPT-OFF,
RPT-OFF
RPT-POS,
RPT-NEG,
RPT-PROG
Remarks
¥ This is the frequency the VFO uses to receive mes-
sages.
¥ You are not allowed to enter out-of-bound frequen-
cies.
¥ Use the keypad to enter the frequency directly.
¥ This is the frequency the VFO uses to transmit
messages, when repeater offset is set to OFS-
PROG (User DeÞned Tx Frequency).
¥ You are not allowed to enter out-of-bound frequen-
cies.
¥ Use the keypad to enter the frequency directly.
¥ Select the repeater offset frequency to be used.
¥ When repeater offset is set to OFS-POS, this offset
frequency will be added to the VFO Rx frequency to
transmit messages.
¥ When repeater offset is set to OFS-NEG, this offset
frequency will be deducted from the VFO Rx fre-
quency to transmit messages.
¥ Unit is in 100kHz. Repeater offset frequency there-
fore ranges from 0kHz to 10MHz in the increment of
100kHz.
¥ Press + or - to select the desired repeater offset fre-
quency.
¥ Selects the repeater offset to be used.
¥ Select OFF if Tx frequency equals Rx frequency.
¥ Select POS if Tx frequency is the sum of Rx fre-
quency and the offset frequency.
¥ Select NEG if Tx frequency is the difference of Rx
frequency and the offset frequency.
¥ Select PROG if Tx frequency equals the User
DeÞned Tx frequency.
¥ Press + or - to select the desired repeater offset.
4-15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
