Examples - Motorola GP2000 Service Manual

4-20
4.10

Examples

4.10.1 Copying All Parameters from One Channel to Other Channel(s)
Scenario: To copy the parameters in Channel 005 into the following channels - 029, 032, 045, 089
Steps:
1. Enter Programming Mode, by pressing MON and turning on the radio.
2. Press + or - to select CH 005.
3. Press PTT or MON until CH-COPY is displayed.
4. Press +. The Þrst channel holder, C-01-, will be displayed. Use the keypad to enter 029.
5. Press + again. When C-02- appears, use the keypad to enter 032. Repeat this step for chan-
nels 045 and 089.
NOTE: If a mistake is made, use + or - to move to the appropriate channel holder and press # to
erase the channel number.
6. Press PTT or MON, when all the channel numbers have been entered. Radio will display
COPY OK.
7. Press + to conÞrm channel duplication or - to exit without duplication.
8. Turn off your radio, if you have completed the programming, or proceed to the next parame-
ter.
4.10.2 Entering a Channel Alias
Scenario: To give Channel 028 an alias SECURITY.
Steps:
1. Enter Programming Mode, by pressing MON and turning on the radio.
2. Press + or - until CH 028 is displayed.
3. Press PTT or MON until CH TAG is displayed.
4. Press +. The cursor will be placed on the Þrst character.
5. Press 7 Þve times. The display will change from 7 -> P -> Q -> R -> S.
6. Use the table below to enter the other characters.
7. Press PTT or MON, after the last character has been entered.
8. Turn off your radio, if you have completed the programming, or proceed to the next parame-
ter.
Keypad Button 1
1
2
3
4
5
st nd
Press 2 Press
1
2 A
3 D
4 G
5 J
rd th
3 Press 4 Press
B C
E F
H I
K L
Programming Mode
th th
5 Press 6 Press
th
7 Press