Atmf 25.6 Port Configuration - Alcatel SPEED TOUCH PRO User Manual

11 Networking - ATM

11.2 ATMF 25.6 Port Configuration

Disclaimer
This section applies only to the dual STPro model, equipped with
both Ethernet and ATMF 25.6 port.
ATM connectivity in
If your PC (alternatively via an ATM switch) is connected to the
ATMF interface, ATM service is delivered into the PC.
your LAN
This implies that ATM cells, sourced by PC applications via the
PC's ATMF PC NIC port are captured by the STPro ATMF 25.6
port and cross connected or switched to the DSL line.
The STPro ATMF 25.6
The STPro's ATMF 25.6 port is completely transparent to upper
protocol layers.
port
The PC ATMF 25.6
The available support of the packet services depend solely on
your ATMF 25.6 PC NIC's capabilities.
PC NIC
Consult your ATMF 25.6 PC NIC documentation for information
on service configuration.
ATM VC support
The VPI/VCI of the VCs, cross connected between the DSL line and
the ATMF 25.6 port, are listed in appendix C.
Connectivity is only possible if your ATMF 25.6 PC NIC is sending
and receiving ATM cells on one (or more) of these VCs.
123 / 238
3EC 17059 ABAA TCZZA Ed. 01