Alcatel SPEED TOUCH PRO User Manual page 187

The Ping of Life
procedure
3EC 17059 ABAA TCZZA Ed. 01
Proceed as follows:
1. Turn off the STPro.
2. Open a command line (DOS) window (Windows OS), or a
terminal window (UNIX, Linux) on a PC.
3. At the command prompt execute: arp –a
This allows you to overview the current entries in the ARP
cache.
4. Add a static entry to the ARP cache, according to following
syntax:
arp –s <STPro IP address> 01–90–D0–80–01–01
<STPro IP address> is a placeholder for the IP address to
be assigned to the STPro. It can be any address within your
subnet as long as it is not used by any other member of your
local network.
5. To verify whether this step was successful execute arp –a a
second time.
In the entries list, your arp –s command entry should be
added.
6. Initiate a continuous pinging, by executing following
command:
ping –t <STPro IP address>
7. Turn on the STPro.
8. After the STPro finished its POST, it will configure the IP
address <STPro IP address> you are pinging.
9. You must clear the entry in the ARP cache by issuing
the following command:
arp –d <STPro IP address>
10. Verify connectivity by pinging the STPro a second time:
ping <STPro IP address>
The STPro should reply.
11. Browse to the STPro pages and click
new IP address permanent.
16 Maintenance - Speed Touch To Defaults
to make the
187 / 238