Using Pptp Towards Your Stpro - Alcatel SPEED TOUCH PRO User Manual

8.2.2

Using PPTP towards your STPro

PPPoA/PPTP
configuration
Opening a session
Credentials
3EC 17059 ABAA TCZZA Ed. 01
Per default, following PPTP phonebook entries are available for
PPPoA/PPTP connections:
RELAY_PPP1 (PPTP on 8.48)
"
RELAY_PPP2 (PPTP on 8.49)
"
RELAY_PPP3 (PPTP on 8.50)
"
RELAY_PPP4 (PPTP on 8.51)
"
In case these PPTP phonebook entries do not meet your
requirements, you can configure a new one.
See section 11.3 for more information.
Depending on your OS, you can open a session by either double
clicking the PPTP session icon or selecting it from a RAS table and
clicking 'Dial Up' or 'Connect'.
Before you can actually browse the Internet or contact the remote
side's resources, you must supply the following credentials:
A user name
"
An associated password.
"
Note: Most, if not all OSs allow the credentials to be saved.
8 Configuration and Use - PPP to PPTP Relaying
65 / 238