Preparatory Steps - Alcatel SPEED TOUCH PRO User Manual

10 Configuration and Use - CIP & IP Routing

10.1 Preparatory Steps

Needed information
Multiple destinations
PC(s)
98 / 238
VPI/VCI value of the VC(s) to use on the DSL line
"
CIP packet service must be supported on this VC
"
Encapsulation method (LLC/SNAP)
"
For full compliancy to RFC1577 the remote access device
"
must issue and respond to InATMARP messages.
Note: The RFC1577 on which Classical IP over ATM relies is updated by
RFC2225. The STPro fully complies with both RFCs.
The STPro can manage up to 12 CIP connections simultaneously.
Note: Check with your SP whether multiple end to end connectivity is enabled.
In order to use the CIP & IP Routing mode of the STPro, the OS on
your PC(s) must support TCP/IP .
See chapter 12 for more information on IP .
3EC 17059 ABAA TCZZA Ed. 01