ZyAIR B-220 User's Guide
Table 9 Station Mode: Security Settings: RADIUS: WEP Encryption (continued)
LABEL
Key x (where x is a
number between 1
and 4)
Next
3.3.2.4.2 Authentication
Figure 18 Station Mode: Security Settings: RADIUS: Authentication
The following table describes the labels in this screen.
Table 10 Station Mode: Security Settings: RADIUS: Authentication
LABEL
Authentication
Type
Login Name
Password
39
DESCRIPTION
Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
Note: ASCII WEP keys are case sensitive.
Click Next to go to the next screen.
DESCRIPTION
Select an authentication method from the drop down list. Options are EAP-TLS,
EAP-TTLS, EAP-MD5, EAP-PEAP and LEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select EAP-TLS in the Authentication Type
field.
Enter the password associated with the user name above.
Chapter 3 Wireless Station Mode Configuration