Important Note Federal Communications Commission (FCC) Interference Statement The Wireless LAN Adapter has been tested to the FCC exposure requirements (Specific Absorption Rate). The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d) (2). This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 3
• A minimum of 32 MB RAM • A CD-ROM drive • A USB port (version 1.1 compatible) • Windows 98 SE/Me/2000/XP • Windows 98 SE users may need the Windows 98 SE CD 2. ZyAIR Utility and Hardware Installation The installation procedures are similar for all supported Windows versions.
After you install the ZyAIR Utility and insert the ZyAIR, an icon appears in the system tray. If the ZyAIR Utility icon displays, the ZyAIR is installed properly. Refer to the ZyAIR Utility User’s Guide to configure The following table describes the LED on the front panel of the ZyAIR. COLOR STATUS Blue...
PROBLEM Windows does not Make sure the ZyAIR USB connecter is inserted into the auto-detect the computer USB port properly and then restart your computer. ZyAIR. Check the LED on the ZyAIR. Perform a hardware scan by clicking Start, Settings, Control Panel and double-clicking Add/Remove Hardware.