Change Zyair Mode; Figure 2 Zyxel Utility: Change Modes - ZyXEL Communications ZyAIR B-220 User Manual

In wireless station mode, your ZyAIR must connect to a peer wireless station or an AP to take
part in your wireless network.
In access point mode, your ZyAIR functions as an access point. This allows you to set up your
wireless network without using a dedicated AP device. Up to 16 wireless stations can associate
to the ZyAIR to form a wireless network. Refer to
page 20 and

1.6.1 Change ZyAIR Mode

To change between the modes, select either the Station Mode or AP Mode option in the any
ZyXEL Utility screens.

Figure 2 ZyXEL Utility: Change Modes

Note: Wait for about five seconds for the ZyXEL Utility to complete the mode
change.
The current mode is indicated by the color of the radio button.
When you use the Windows XP WZC and the ZyXEL Utility to configure the
ZyAIR at the same time, the ZyAIR automatically operates in wireless station
mode and doesn't allow any configuration change.
Chapter 1 Getting Started
Chapter 4, "Access Point Mode Configuration," on page 48
ZyAIR B-220 User's Guide
Section 1.6.1 "Change ZyAIR Mode" on
for more information.
20