Radius; Figure 17 Station Mode: Security Settings: Radius: Wep Encryption; Table 9 Station Mode: Security Settings: Radius: Wep Encryption - ZyXEL Communications ZyAIR B-220 User Manual

Table 8 Station Mode: Security Settings: WPA-RADIUS: Authentication
LABEL
PEAP Inner EAP
Save

3.3.2.4 RADIUS

The following section describes how to configure IEEE 802.1x security with various
authentication methods.
3.3.2.4.1 WEP Encryption

Figure 17 Station Mode: Security Settings: RADIUS: WEP Encryption

The following table describes the labels in this screen.

Table 9 Station Mode: Security Settings: RADIUS: WEP Encryption

LABEL
Security Settings
WEP
Authentication
Pass Phrase
Transmit Key
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
This field is only available when you select EAP-PEAP in the Authentication
Type field.
Use the drop-down list box to select a PEAP protocol. Options are MD5
CHALLENGE, TOKEN CARD and MS CHAP v2.
Click Save to save the changes back to the ZyAIR and display the Link Info
screen. Otherwise, click the close (
the Site Survey screen.
DESCRIPTION
Select 64 Bits or 128 Bits to activate WEP encryption and then fill in the related
fields.
Select Disable to deactivate WEP encryption.
Select an authentication method. Choices are Auto, Shared Key and Open
System. Refer to Section 2.3 "Authentication Type" on page 29
information.
This field is not applicable when you select the RADIUS encryption method.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyAIR B-220 User's Guide
) button to discard changes and go back to
for more
38