Table 27 Windows XP: Wireless (network) properties: Association (continued)
LABEL
OK
Cancel
Authentication
Click the Authentication tab in the Wireless (network) properties screen to display the
screen shown next. The fields on this screen are grayed out when the network is in Ad-Hoc
mode or data encryption is disabled.
Figure 56 Windows XP: Wireless (network) properties: Authentication
The following table describes the labels in this screen.
Table 28 Windows XP: Wireless (network) properties: Authentication
LABEL
Enable IEEE
802.1x
authentication
for this network
EAP Type
Properties
Appendix D Management with Wireless Zero Configuration
DESCRIPTION
Click OK to save your changes.
Click Cancel to leave this screen without saving any changes you may have
made.
DESCRIPTION
This field displays whether the IEEE 802.1x authentication is active.
If the network authentication is set to Open in the previous screen, you can choose to
disable or enable this feature.
Select the type of EAP authentication. Options are Protected EAP (PEAP) and
Smart Card or other Certificate.
Click this button to open the properties screen and configure certificates. The screen
varies depending on what you select in the EAP type field.
ZyAIR B-220 User's Guide
80