En−Block Dialling; Redialling; Dialling Pause - Avaya T3 Standard Operating Instructions Manual

Making Calls
En−block dialling
0 9
.. Dial the required phone number. If you have entered an incorrect digit,
C
delete it with the
Lift the receiver or press the loudspeaker button
Complete the conversation.
To end the call, press the Handsfree button

Redialling

If the number you dial is engaged or no−one takes the call, replace the telephone
receiver. The last phone number dialled with a maximum of 32 digits is
automatically saved in the telephone.
Lift the receiver or press the Handsfree button
W
(or vice versa). The number stored in the redialling memory is dialled.

Dialling pause

In certain private branch exchanges, there is a short pause between dialling the
number for an outside line (usually 0 or 9) and hearing the dialling tone. When
dialling manually, this pause can be entered with the number to prevent the
following digits being dialled too quickly.
Lift the receiver or press the Handsfree button
Dial the number for an outside line.
W
Press . Then dial the actual phone number.
Or: Dial the number for an outside line, press
lift the receiver or press the Handsfree button
After dialling the number for the outside line, the telephone then waits 3 seconds
before dialling the actual phone number.
The dialling pause can also be entered in the redialling function or phone book
entries as well as stored in the one and two−touch dialling memories.
button.
H
.
H
or replace the receiver.
H
, press the redialling button
H
.
W
, dial the phone number and then
H
.
Telephoning
Continued
43