Setting The Display Contrast; Labels; Wall Assembly - Avaya T3 Standard Operating Instructions Manual

Familiarizing Yourself with the Telephone
Starting Up
Continued

Setting the display contrast

When the receiver is on−hook, press the D button to set the display contrast to
one of four settings.

Labels

Labels are available on the telephone with which to label the numbers assigned to
the one−touch dialling keys and to the emergency service numbers.
To print a label:
Prize up the cover at the tab using your fingernail and remove the label.
Reinserting the printed label:
Insert the printed label, slide the cover into place and press down on the other side
until it snaps into place.

Wall assembly

The telephone is also suitable to be installed on a wall. You need the optionally
available wall bracket for T3 telephones to do this. In order to prevent the receiver
from falling when placed on the hook following wall installation, the receiver cradle
is equipped with a small hook device. Use a small screwdriver to turn the hook
device 180° until a small hook is produced at the top end.
38