Connecting The Telephone To The Telephone Line Cable; Setting The Display Language; Setting/Changing The Time And Date; Setting The Recall (Flash) Time - Avaya T3 Standard Operating Instructions Manual

Starting Up

Connecting the telephone to the telephone line cable

Connect a plug at the end of the telephone line cable to socket 2. Then press the
cable in the guide.
Insert the plug at the other end of the telephone line cable in the wall socket /
connection socket (UAE).

Setting the display language

When the receiver is on−hook, press and hold the
[ GER ] ENG
D
Press to select the required language and confirm by pressing
hour display then flashes.

Setting/Changing the time and date

Wait until the hour indicator flashes in the display.
D
Press as often as necessary until the current hour appears.
Confirm by pressing
D
Press as often as necessary until the current minute appears.
Confirm by pressing
D
Press as often as necessary until the current day appears.
Confirm by pressing
D
Press as often as necessary until the current month appears.
Confirm by pressing
the display.

Setting the recall (flash) time

Set the sliding switch
recall) setting.
SPA appears in the display.
C
. The minute indicator flashes.
C
. The day indicator flashes.
C
. The month indicator flashes.
C
. Input is then completed and the current data appears in
K
at the side of the telephone to the "100 ms" (short
Familiarizing Yourself with the Telephone
$
button for approx. 4 seconds.
Continued
C
. The
37