Machine Labels - Grizzly G1023RLX Owner's Manual

G1023RL
551
G1023RL Labels B
204
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.
225
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
artwork on other brands of machines.
213
REF PART # DESCRIPTION
201 G8588 GRIZZLY LOGO PLATE SMALL
202 P1023RL202 ID LABEL G1023RL
202V2 P1023RLWX202V2 ID LABEL G1023RLWX V2.06.14
202 P1023RLW202 ID LABEL G1023RLW
202 P1023RLX202 ID LABEL G1023RLX
203 PLABEL-12A READ MANUAL LABEL 2W X 3.3H
204 PLABEL-63 DISCONNECT 220V 2W X 3.3H
205 PLABEL-57 GLASSES/RESPIRATOR 2W X 3.3H
207 P1023RL207 MODEL # LABEL G1023RL
207 P1023RLX207 MODEL # LABEL G1023RLX
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
-90-

Machine Labels

207
G1023RL Labels B
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.
The Model G1023RL series
spreader/riving knife is
0.1" thick. Follow these
requirements to ensure the
spreader/riving knife works
safely:
BLADE REQUIREMENTS
Standard Blades
• Diameter: 10"
• Max. Body Thickness: 0.094"
• Min. Kerf Thickness: 0.122"
• Must be aligned with
spreader or riving knife.
Dado Blades
• Riving knife or spreader not
compatible with dado blades
smaller than 10" in diameter .
• Max Width 13/16"
224
205
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
artwork on other brands of machines.
WARNING! WARNING!
DISCONNECT
ALWAYS USE
POWER
GUARDS AND
BEFORE
ANTI-KICKBACK
CHANGING
DEVICES!
BLADES!
211
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
artwork on other brands of machines.
Specifications
Motor: 3 HP, 240V, 1-PH,
6 0 H , z 1 4 A
Arbor Speed: 4200 RPM
Max. Blade Size: 10"
Max. Width Of Cut: 25-5/8"
Max. Depth Of Cut 90˚: 3"
Max. Depth Of Cut 45˚: 2-1/8"
Max. Dado Width: 13/16"
Arbor Size: 5/8"
Table Size: 40" X 27"
Table Height: 34"
201
Weight: 410 Lbs.
Date
177335
Serial Number
Manufactured for Grizzly in Taiwan
202, 202V2
WARNING!
REF PART # DESCRIPTION
207 P1023RLW207 MODEL # LABEL G1023RLW
207 P1023RLWX207 MODEL # LABEL G1023RLWX
208 PPAINT-1 GRIZZLY GREEN TOUCH-UP PAINT
209 P1023RL209 BLACK TAPE 90MMH
211 P1023RL211 BLADE GUARD WARNING LABEL
213 P0651714 UL 987 WARNING LABEL
224 P1023RL224 TABLE SAW CAUTION LABEL
225 P1023RL225 DAMPNESS HAZARD LABEL
551 P1023SL551 RAIL WARNING LABEL
Model G1023RL Series (Mfd. Since 12/11)
G1023RL Labels B
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.
203
208 COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
artwork on other brands of machines.
209
MODEL G1023RL
10" LEFT-TILT TABLE SAW
WITH RIVING KNIFE
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Never touch a moving blade and keep hands out of blade path.
3. Always wear ANSI approved eye protection and a respirator.
4. Always use blade guard/spreader for all through cuts; and use
riving knife for all non-through cuts.
5. Only use blades meeting size/speed requirements for this saw.
6. Make sure spreader/riving knife is properly installed/adjusted.
7. Never reach behind or over blade while it is moving.
8. Use a push stick when required, and whenever possible.
9. Understand "kickback", what causes it, and how to prevent it.
10. Never remove jammed/cutoff workpiece when blade is moving!
11. Make sure blade is stopped before adjusting height/tilt.
12. Do not perform any operation freehand.
13. Ensure machine is stable and fence is parallel with blade.
14. Disconnect power before changing blades or servicing saw.
15. Plan cuts so that workpieces always remain supported.
16. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
17. Operate in a dry environment that is free of rain or dampness.
18. Do not allow untrained people to access this saw. If access
cannot be restricted, lock-out or disable saw from operation.
WARNING!