Adjustment - Yamaha SRX440 1980 Service Manual

3. Install the steering column on the frame.
Before this operation. coat the steering
lower and upper bearing with grease.
Tighten the nuts. and bend the lock
washer tab.
Tightening torque:
UPPER: 7.3 Nm (0.73 m-kg)
LOWER: 13.7 Nm (1.37 m-kg)
1980 SRX440
B. Adjustment
Hold the handlebar straight and check to see
that the skis are parallel. If not, loosen the
steering relay rod lock nut, and by turning the
steering relay rod in or out. adjust the ski toe-
out to specification (see below).
Ski width: agO mm (35.0 in)
Ski toe-out: 0
~
6 mm (0
~
0.23 in)
4. Connect the steering relay rod to the
steering column. Install a new cotter pin.
Tightening torque:
30 Nm (3.0 m-kg)
6-3
Steering relay rod tightening torque:
25 Nm (2.5 m-kg)
'lI
A
. Front /
/'1
I
B
~CD
C
-
'--
'->'-
1. Ski spinglecenter A - C
=
0,....,
6 mm (0,...., 0.23 in)
B. Ski width