HP ENVY Maintenance And Service Manual page 76

9. If it is necessary to replace the display panel:
a. Remove the display bezel.
b. Remove the four Phillips PM2.0×3.3 screws that secure the display panel to the display back cover.
CAUTION:
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
c. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in
front of the display back cover.
d. Release the adhesive strip (2) that secures the display panel cable connector to the display panel.
e. Disconnect the display panel cable (3) from the display panel.
The display bezel is available using the following spare part numbers:
●
●
●
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Before turning the display panel upside down, make sure the work surface is clear of
833717-001 – 14.0-in, FHD, WLED, AntiGlare (1920×1080), slim (3.0-mm), UWVA eDP 1.2
818124-001 – 14.0-in, FHD, WLED, AntiGlare (1920×1080), slim (3.0-mm), SVA eDP 1.2
818123-001 – 14.0-in, HD, WLED, AntiGlare (1366×768), flat (3.6-mm), SVA eDP 1.2