Left Speaker - HP ENVY Maintenance And Service Manual

Reverse this procedure to install the heat sink.

Left speaker

Description
Left speaker (includes cable)
Before removing the left speaker, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Fan (see
c. RJ45 cover (see
d. Security cable slot bracket (see
e. System board (see
Remove the left speaker:
1. Remove the two Phillips PM2.0×3.3 screws (1) that secure the left speaker to the top cover.
Bottom cover on page
Battery on page 38)
Fan on page 47)
RJ45 cover on page
Security cable slot bracket on page
System board on page
28), and then remove the following components:
49)
52)
Component replacement procedures
Spare part number
818129-001
51)
59