HP ENVY Maintenance And Service Manual page 54
Hide thumbs
Also See for ENVY:
- Maintenance and service manual (127 pages) ,
- Disassembly instructions (5 pages) ,
- Maintenance and service manual (82 pages)
Table of Contents
Advertisement
2.
Release the ZIF connector (1) to which the fingerprint reader board cable is attached, and then
disconnect the fingerprint reader board cable from the system board.
3.
Release the fingerprint reader board cable (2) from the TouchPad board. (The fingerprint reader board
cable is secured to the TouchPad board with double-sided adhesive.)
4.
Release the ZIF connector (3) to which the card reader board cable is attached, and then disconnect
the card reader board cable from the system board.
5.
Remove the two Phillips PM2.0×3.3 screws (4) that secure the fingerprint reader board to
the top cover.
6.
Remove the fingerprint reader board bracket (5).
44
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Hide quick links:
Advertisement
Table of Contents
