When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
WLAN module (see
●
Heat sink (see
●
Memory module (see
Remove the system board:
1.
Disconnect the following cables from the system board:
●
(1) WLAN antenna cables from the terminals on the WLAN module
NOTE:
The #2/black WLAN antenna cable connects to the WLAN module #2/Aux terminal.
●
(2) Subwoofer cable
●
(3) Power connector cable
●
(4) Hard drive ZIF connector cable
●
(5) TouchPad board ZIF connector cable
●
(6) Keyboard backlight ZIF connector cable
2.
Disconnect the following cables from the system board:
●
(1) Keyboard ZIF connector cable
●
(2) Fingerprint reader board ZIF connector cable
●
(3) RTC battery cable
●
(4) Card reader board ZIF connector cable
●
(5) Front speakers cable
54
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
WLAN module on page
Heat sink on page
56)
Memory module on page
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal.
32)
34)