Level 1 and 2 Service Manual
Removing and Replacing the Display Assembly
G
6809490A73
Use only non-conductive tools, such as the plastic disassembly tool and the plastic
tweezer, display assembly.
To remove the Display Assembly
1.
Follow the procedures to remove the:
•
Battery Door
•
Battery
•
SIM card
•
Front Housing
•
Rear Housing
•
Joystick Assembly
2.
Use the disassembly tool to gently the display flex connector from its socket on
the transceiver board.
3.
Use the disassembly tool to disengage the 4 display laches and lift the display
assembly away from the transceiver board.
Disassembly
Tool
Display Flex
Connector
Display
Display
Latch
Transceiver
Figure 13. Removing the Display Assembly
October 4, 2004
Board
Disassembly
Display
Latch
29