Disassembly
28
3.
Turn the transceiver board over and using the disassembly tool, disengage the
joystick flex connector and lift it off of the transceiver board.
Latch
Joystick Assembly
Flex
Connector
Disassembly
Tool
Figure 12. Removing the Joystick Assembly
To replace the joystick assembly
1.
Align the joystick flex connector with the connector on the transceiver board
and press it into place
1.
Align the joystick assembly with the transceiver board and press it into place.
2.
Follow the procedures to replace the:
•
rear housing
•
front housing
•
SIM card
•
battery
•
battery door
October 4, 2004
Latch
6809490A73
E1000