Disassembly; Removing And Replacing The Battery Door - Motorola E1000 Service Manual

Wireless telephone 2nd draft gsm 900/1800/1900 and wcdma 2100 mhz

Hide thumbs Also See for E1000:

Table of Contents

Disassembly

This section describes how to disassemble the E1000 telephone. Refer to Table 4 for

a list of tools and equipment used.

Many of the integrated devices used in this phone are vulnerable to damage from

electrostatic discharge (ESD). Ensure you use adequate static protection when

handling, shipping, and servicing the internal components.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

Ensure the phone is turned off.

Press the battery door release button and slide the battery door toward the

bottom end of the phone.

Lift the battery door up and away from the phone.

Figure 3. Removing and Replacing the Battery Door

To replace, align the battery door the phone.

Lower the battery door onto the phone.

Slide the battery door toward the top of the phone to lock the battery door

release

October 4, 2004

E1000

Door Release

Button

6809490A73

Table of Contents