Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Display Module Assembly
G
6809505A64-A
1.
Remove the battery cover, battery, USIM, rear housing, antenna, transceiver
board assembly, flip assembly cover, and camera assembly, as described in the
procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Use the disassembly tool to unseat the display module assembly flex connector
from its socket (see Figure 14)
Display Module Flex
Side keys
Side keys
Figure 14. Display Module Assembly Flex Connector
3.
Carefully and gently lift one corner of the display module assembly out of the
flip assembly.
4.
Separate side keys, set aside for reassembly.
5.
Seperate the speaker from its adhesive by prying the speaker off using the
disassemby tool.
6.
Avoid damage to the electrical components on the flex while carefully removing
the display module assembly from the flip assembly.
May 09, 2007
Disassembly
Side keys
27
Advertisement
Table of Contents
