Removing And Replacing The Rear Housing - Motorola E1000 Service Manual

Disassembly

Removing and Replacing the Rear Housing

22
To remove the rear housing
1. Follow the procedures in this section to remove the:
• Battery door
• Battery
• SIM card
• Front housing
2. Lift the transceiver board from the bottom and out of the rear housing.
Figure 7. Rear Housing Removal
To replace the rear housing
1. Insert the front of the transceiver board into the rear housing and press it into
place.
2. Follow the procedures to replace the:
• front housing
• SIM card
• battery
• battery door
October 4, 2004
Rear Housing
Transceiver Board
E1000
6809490A73