Tools And Test Equipment - Motorola E1000 Service Manual

Level 1 and 2 Service Manual

Tools and Test Equipment

Table 4. General Test Equipment and Tools
Motorola
1
Part Number
--- Charger
Antistatic Mat Kit (includes 66-80387A95 antistatic
0180386A82 mat, 66-80334B36 ground cord, and 42-80385A59
wrist band)
Disassembly tool, black plastic with flat and
3
0-00-00-30005
pointed ends
6680388B01 Tweezers, plastic
RSX4043-A Torque Driver
Torque Driver Bit T-6 Plus, Apex 440-6IP Torx Plus
—
or equivalent
2
HP34401A Digital Multimeter
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone (800) 422-4210 or
fax (800) 622-6210; Internationally, you can reach AAD by phone (847) 538-8023 or fax (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
3. Not available from Motorola. To order, contact:
AMS Software & Elektronik GmbH
c/o Holger Grube
Lise-Meitner-Straße 9
D-24941 Flensburg Tel.: +49-461-90398-0
Fax: +49-461-90398-50
6809490A73
1 and 2
E1000
6809490A73
Table 4 list the tools and test equipment used on E1000 telephones. Use either the
listed items or equivalents.
Description
October 4, 2004
Tools and Test Equipment
Application
Used to charge battery and to power phone
Protects phone from damage caused by
electrostatic discharge (ESD)
Used to assemble/disassemble phone
Used to assemble/disassemble phone
Used to remove and replace screws
Used with torque driver
Used to measure battery voltage
17