Table of Contents
Advertisement
Memory Function of the electrically adjustable seat
Read and observe
on page 81 first.
The pre-set buttons on the driver's seat make it possible to save the driver's
seat and exterior mirror positions.
Each of the three memory buttons
sition.
Storing driver's seat and exterior mirror settings for driving forward
›
Switch-on the ignition.
›
Adjust the seat and the two mirrors to the desired position.
›
Press the button (Position
A
›
Within 10 seconds after pressing the button, press the desired memory
button
.
B
An acknowledgement sound confirms the storage.
Saving front passenger mirror settings when reversing
The function of lowering the passenger mirror surface when reversing must be
enabled in Infotainment
»
Owner´s Manual Infotainment, chapter CAR - Vehi-
cle Settings .
›
Switch-on the ignition.
›
Press the required memory button
›
Turn the knob for the external mirror control to the position for the passen-
ger side mirror adjustment
» page
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position.
›
Disengage reverse gear.
The set position of the exterior mirror is stored.
Fig. 75
Memory buttons and SET button
» Fig. 75
can each be assigned a set po-
B
» Fig.
75).
» Fig.
75.
B
80.
Retrieving the saved setting
Ignition
Driver's door
Open
Switched off
Closed
Open
Activated
Closed
Stopping the ongoing adjustment
▶
Press any button on the driver's seat or the button
key.
Note
Each time you save the seat- and exterior mirror settings for forward travel
you also have to re-save the setting of the exterior mirror on the passenger
side for reversing.
Memory function of the remote control key
Read and observe
on page 81 first.
The automatic storage of the driver's seat and exterior mirror positions when
locking the vehicle can be turned on in the memory of the remote control key
(hereafter as function of automatic storage).
This function can also be enabled or disabled in the
Manual Infotainment, chapter CAR - vehicle settings.
Activate the function of automatic storage
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
›
After the seat has assumed the position stored under this button, at the
same time press the button
The successful activation of the automatic storage function for each key is
confirmed by an acoustic signal.
Storing driver's seat and exterior mirror settings for driving forward
›
Enable automatic storage.
When automatic storage is activated, the current positions of the driver's seat
and the external mirrors are saved in the memory of the remote control key
each time the vehicle is locked.
Press the required memory button
» Fig. 75
Short
Long
Long
Long
on the remote control
Infotainment»
» Fig. 75
on page 83.
B
on the remote control key within 10 seconds.
Seats and head restraints
B
Owner´s
83
Advertisement
Chapters
Table of Contents
