Mount in the storage compartment in the rear armrest
Fig. 124 Open storage compartment / room for holder / holder removal
Read and observe
on page 104 first.
Fitting
›
Grasp the storage compartment cover to the recess
›
Open the cover in the direction of the arrow.
›
Insert the holder in the space
B
Removing
›
Pull on the locking strap
in the direction of the arrow
C
›
Remove the holder from the slot.
›
Close the storage compartment cover in the opposite direction of the arrow
until it clicks.
Handling the holder
Fig. 125 Tilting and rotating the holder
» Fig.
124.
A
until it stops.
» Fig.
124.
Read and observe
on page 104 first.
Tilting and rotating the holder
The holder may be tilted 30° in the direction of arrow
360° in the direction of arrow
2
Adjusting the holder size
›
Pull out the securing tab
in the direction of arrow
A
direction of arrow
to the desired position
4
Luggage compartment and transport of cargo
Introduction
This chapter contains information on the following subjects:
Fastening elements
Adjusting the holder size
and rotated through
1
» Fig.
125.
and move part
3
» Fig.
126.
Transporting and practical equipment
in
B
106
107
107
108
108
108
108
109
110
111
112
112
113
114
114
105