The following symbols are displayed next to each entry in the call list.
Incoming call
Outgoing call
Missed call
Outgoing call
Cancel - Ends the call
■
Incoming call
Answer – Answer incoming call
■
Reject – Reject incoming call
■
Ignore - Mute the ringer (this option is only available if there is no other call)
■
Ongoing conversation or conference call
Hang up - End a call
■
■
Hold – Hold a call
Continue – Continue held call
■
Mic. off – Microphone off
■
■
Mic. on – Microphone on
Private – Switch the call to the telephone
■
Hands-free – Toggles the call to the device
■
Ongoing and held call
Hang up – End an ongoing call
■
Call wait. – Switch to a held call
■
■
Conference – Make a conference call
Mic. off – Microphone off
■
Mic. on – Microphone on
■
■
Private – Switch ongoing call to the telephone
Hands-free – Switch ongoing call to the device
■
Symbols in the display
Charge status of the telephone battery
Signal strength
1)
A telephone is connected to the unit
Missed calls (if there are several missed calls, the number of calls is shown
next to the symbol)
Switch-off microphone
1)
This function is only supported by some mobile phones.
48
Using the system
1)
1)
Menu itemAssist systems
Read and observe
on page 45 first.
Select menu item Assist systems
›
Select and confirm Assist systems in the main menu.
or
›
Press the button on the multi-function steering wheel .
In the menu Assist systems the systems Front Assist, Lane departure warning
(Lane Assist), Rear Traffic Alert and blind spot monitoring can be enabled/disa-
bled.
Compass point display
Fig. 34
Compass display
Read and observe
on page 45 first.
Applies to vehicles with factory-installed navigation system.
In the display when the ignition is on, an arrow symbol as well as an abbrevia-
tion for the corresponding direction (in relation to the current direction of trav-
el) are displayed
» Fig.
34.
Note
The direction indicator can be displayed at the top or bottom of the screen dis-
played in response to further information.