Memory Function Of The Electrically Adjustable Seat; Memory Function Of The Remote Control Key - Skoda Octavia Owner's Manual

Memory Function of the electrically adjustable seat


Read and observe on page 81 first.
The pre-set buttons on the driver's seat make it possible to save the driver's
seat and exterior mirror positions.
Each of the three memory buttons
Storing driver's seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat and the two mirrors to the desired position.
›
Press the  button (Position
A
›
Within 10 seconds after pressing the  button, press the desired memory
button .
B
An acknowledgement sound confirms the storage.
Saving front passenger mirror settings for reversing
The function of lowering the passenger mirror surface when reversing must be
enabled in Infotainment » Owner´s Manual Infotainment, chapter CAR - Vehi-
cle Settings .
›
Switch on the ignition.
›
Press the required memory button
›
Turn the knob for the external mirror control to the position for the passen-
ger side mirror adjustment » page
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position.
›
Disengage reverse gear.
The set position of the exterior mirror is stored.
84
Using the system
Fig. 76
Memory buttons and SET button
» Fig. 76 can be assigned a set position.
B
» Fig. 76).
» Fig. 76.
B
80.
Retrieving the saved setting
Ignition Driver's door
Open
Switched off
Closed
Open
Activated
Closed
Stopping the ongoing adjustment
▶
Press any button on the driver's seat or the button
key.
Note
Each time new seat and exterior mirror settings for forward travel are saved,
the passenger exterior mirror setting for reverse travel must also be saved
again.

Memory function of the remote control key


Read and observe on page 81 first.
The automatic storage of the driver's seat position and exterior mirror posi-
tions when locking the vehicle can be turned on in the memory of the remote
control key (hereafter referred to as automatic storage function).
This function can also be enabled or disabled in the
Manual Infotainment, chapter CAR - vehicle settings.
Enable automatic storage
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
›
After the seat has assumed the position stored under this button, at the
same time press the button

The successful activation of the automatic storage function for each key is
confirmed by an acoustic signal.
Storing driver's seat and exterior mirror settings for driving forward
›
Enable automatic storage.
When automatic storage is activated, the current positions of the driver's seat
and the external mirrors are saved in the memory of the remote control key
each time the vehicle is locked.
Press the required memory button
» Fig. 76
Short
Long
Long
Long
on the remote control

Infotainment»
» Fig. 76 on page 84.
B
on the remote control key within 10 seconds.
B
Owner´s
