Replacing the bulb for the fog light
Fig. 274 Remove the number plate light / replace the bulb
Read and observe
and
Remove the protective grille and headlight
›
Insert your fingers into opening
›
Release the protection grill by pulling in the direction of arrow
›
Unscrew the screws
with the screwdriver from the tool kit
B
Vehicle tool kit.
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Pull the lamp holder until it stops in the arrow direction
›
Remove the lamp holder in the direction of the arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
5
›
Attach the connector.
244
Do-it-yourself
on page 242 first.
.
A
1
» page
.
2
.
3
.
4
.
5
.
6
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 274
and tighten.
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Rear Light
.
Fig. 275 Remove light / pull out connector
223,
Read and observe
Removing
›
Open the tailgate.
›
Insert into opening
ers
» page
223, Vehicle tool kit.
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
›
Grasp the light and remove carefully in the direction of arrow
stud
.
C
›
Press together the interlocks on the connector in the direction of arrow
and
on page 242 first.
» Fig. 275
the clamps for removing the full wheel cov-
A
with the screwdriver from the tool kit.
B
2
.
1
from the
2
.
3