Choke Lever - Toro Greensmaster Flex 1800 04040 Operator's Manual

Figure 14
1. Neutral
2. Traction drive neutral and
reel drive off
For reel operation, the lever has 2 positions: Engage and
Disengage. Move the top of the lever to the left then forward
to engage the reel and begin mowing. Push the lever to the
right to disengage the reel and continue forward motion or
pull back on it to disengage both the reel and the traction
drive.
Note: If you release the operator presence control, the lever
will return to Neutral and the machine will stop.
Service Brake
The service brake (Figure
of the handle. Pulling the lever back will apply the service
brake. The brake must be released before the traction drive
is engaged.
3. Traction drive-engaged
(transport)
4. Traction drive and reel
drive engaged
15) is located on the left front side
1. Parking brake latch
Parking-Brake Latch
The parking-brake latch
with the service brake. With the service brake engaged, rotate
the parking brake latch toward the brake handle and release
the service brake onto the latch to hold the service brake in
place. Pull the brake lever to release it.
On/Off Switch
The on/off switch (Figure
panel. Move the switch to the On position to start the engine
and Off to stop the engine.
Operator Presence Control (OPC)
The operator presence control
before engaging the traction lever. Releasing the OPC during
operation will return the machine to neutral but does not kill
the engine.

Choke Lever

The choke lever (Figure
has two positions: Run and Choke. Move the choke lever to
the half-open position when starting a cold engine. After the
engine starts move the lever to the Run position.
14
Figure 15
2. Service brake
(Figure 15) is used in conjunction
12) is located on top of the control
(Figure 12) must be engaged
16) located on the engine. The lever