Checking The Engine-Oil Level; Installing The Grass Basket - Toro Greensmaster Flex 1800 04040 Operator's Manual

3. Rotate the wheel back and forth until it slides
completely onto the axle and the locking clip is secured
in the groove on the axle shaft.
4. Repeat the procedure on the opposite side of the
machine.
5. Inflate the tires to 83-103 kPa (12-15 psi).
6. Carefully lower the machine off the kick stand by
pushing forward slowly or by lifting the lower center
handle support, allowing the kickstand to spring back
to its normal position.
4

Checking the Engine-Oil Level

No Parts Required
Procedure
Check the engine-oil level, refer to
Level (page 27).
5

Installing the Grass Basket

Parts needed for this procedure:
1 Grass basket
Procedure
1. Grasp the basket by the handle
1. Basket hooks
Checking the Engine-Oil
(Figure 9).
Figure 9
2. Guide the basket lip between the cutting unit side
plates and over the front roller
3. Install the basket hooks over the frame loop
Important: If you ever drop the basket, examine the
pitch arm contact points near the lower lip of the basket
for damage (Figure
the basket. Using the basket with bent pitch arm contact
points may cause contact between the basket and reel
causing undesired noise and/or damage to the basket
and reel.
g024292
1. Pitch arm contact point
12
(Figure 9).
10). Straighten them before using
Figure 10
(Figure 9).
1