Using The Choke Lever; Opening And Closing The Fuel-Shutoff Valve - Toro Greensmaster Flex 1021 Operator's Manual

Figure 16
1. Axle
4. Carefully lower the machine off of the kickstand
by pushing forward slowly or by lifting the lower
handle support, allowing the kickstand to spring
back to the S
TORAGE
(page 11).

Using the Choke Lever

Use the choke lever to aid in starting a cold engine.
Move the lever to the C
cold engine. After the engine starts, move the lever
to the R position.
UN
2. Wheel-locking clip
position; refer to Kickstand
position when starting a
HOKE
1. Choke lever—C
position
g307660
Opening and Closing the
Fuel-Shutoff Valve
Control fuel flow to the engine with the fuel-shutoff
valve as follows:
•
To open the fuel valve, turn the fuel-shutoff lever
toward the recoil starter handle
•
To shut the fuel valve, turn the fuel-shutoff lever
away from the recoil starter handle
1. Fuel-shutoff
lever—C
LOSED
16
Figure 17
2. Choke lever—R
HOKE
position
(Figure
(Figure
Figure 18
2. Fuel-shutoff lever—O
position position
g273508
UN
18).
18).
g273576
PEN