Recoil Starter - Toro Greensmaster Flex 1800 04040 Operator's Manual

Traction unit
Table of Contents

Advertisement

Figure 16
1. Choke lever in choke position
Fuel Shut-off Valve
The fuel shut-off valve
(Figure
The valve has two positions: Closed and Open. Move the
lever to the closed position when storing or transporting
machine. Open the valve before starting the engine. The fuel
cup is located below the shut-off valve.
Figure 17
1. Fuel shut-off valve in
closed position
g018267
17) is located on the engine.
2. Fuel cup

Recoil Starter

Pull the recoil-starter handle
1. Recoil starter
Kickstand
The kickstand
(Figure
machine and is used to raise the rear of the machine for
installation or removal of the transport wheels and to keep the
machine for falling onto the handle when you remove the reel.
To use the kickstand to install the transport wheels, lower
it to the ground and step down on the kickstand loop
while pulling up and back on the lower center machine
handle
(Figure
19).
Important: Only put foot pressure down on the
kickstand loop, and only use the lower center
machine handle to raise the unit. Attempting to raise
the unit onto the kickstand by any other means can
cause injury.
15
(Figure
18) to start the engine.
g018268
Figure 18
20) is mounted to the rear of the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents