REMOVAL AND INSTALLATION
WINDSCREEN AND REAR WINDOW GLASS
•
Insert the spout of the gun under the
weatherstrip lips Band C as shown in
the illustration on page 32 and apply
the specified sealing compound.
•
Refit the corner finishers and secure
them in place with the pliers, special
tool P.N. A.9.0035
NOTE - Should the weatherstrip show sign of defect which might impair the waterproofing of the
windscreen, it must be changed with a new one.
The perfect sealing against water leaks depends upon the way the above mentioned procedure is
performed especially as far as care in applying the sealing compound is concerned.
35