•
Start removing the cross member by
tapping lightly with a mallet so as not
to
strain
the
adjoining
structural
components; then, take out the cross
member by raising the body.
REINSTALLATION
•
Cut
the
opening
A
in
the
shock
absorber moun ting.
•
Place the new cross member on the
positioning fixture and secure in place.
•
L ower
the
body
on
the
frame
alignment checking bench.
•
Check for the proper fitting of cross
member with fender skirt panels.
•
Secure the cross member to the body
with clamps and spot welding; then,
take away the positioning fixture.
•
Spot
weld
as
shown
through
the
opening A previously made.
BODY REPAIR
FRONT CROSS MEMBER REPLACEMENT
17