Alfa Romeo GIULIA Shop Manual page 2

BODY ALIGNMENT CHECKING BENCH
PREPARING THE BENCH AND THE BODY
E
E
• Place the bench on a level floor.
• Fit the front and rear screw jacks (do not lock in place those at the rear) and adjust them to the
following height from the bench top:
- Front: 320 to 330 mm
- Rear: 300 mm
It is essential that each pair of jacks is set to the same height.
CAUTION - Make sure the front jack with the S marking is placed at the right side while that with the
D marking is at the left side.
S