Alfa Romeo GIULIA Shop Manual page 24

BODY REPAIR
REPLACING THE FENDER AND FRONT PANELS
REFITTING THE SKIRT
Before refitting the skirt a careful checking must be made with the bench of the alignment of the other
body components involved in the repair and specifically the front cross member either if it is renewed
or merely reinstalled.
• Properly position the skirt inner panel .
• Place extension reference bar, special
tool P.N. A.8.0056, between skirts
(refer to page 13).
• Check that the skirt is properly
positioned by taking measurements
with a caliper between the cross
member upper threaded hole and the
corner made by the opposite skirt with
the smaller cross piece at the front.
23.