BODY REPAIR
FRONT CROSS MEMBER REPLACEMENT
NOTE - On 1300 and 1600 models (Saloon, Coupe, Spider), when only the cross member requires
replacement and the frame alignment checking bench is not available, it is possible to replace the cross
member with the special fixture P.N. A.a.Olog following this procedure:
REMOVAL
•
Take the cross member off as directed on pages 15 and 16.
-~
20
REINSTALLATION
•
Place the new cross member on the
fixture as shown and make it trt the
body.
•
Install the
triangle-sh~ped
part of the
fixture and secure it to the engine
mounts at the front and to the gearbox
attachments at the rear.