BODY REPAIR
REPLACING THE FENDER AND FRONT PANELS
•
Secure
the
skirt in place clamping
together the panel edges.
•
Spot weld the skirt to the cross piece.
•
Arc weld the skirt to the cross member
and to the body panels.
•
Properly posltton the skirt outer p<nel
•
Temporarily
remove
the
extension
reference bar, special tool P.N. A.8.0056,
so as to free the holes.
•
Insert between the skirt panels the two
spacers for reinforcing the steering box
attachment holes.
•
Again install the extension reference
bar special tool P.N. A.8.0056.
24