BODY ALIGNMENT CHECKING BENCH
PREPARING THE BENCH AND THE BODY
•
Bring the suspension attachment checking jigs close to the body after having placed them on the
suitable surfaces of the bench cross members. Secure in place only after the body has been
definitively positioned.
.
CAUTION - Should any difficulty arise in mounting the rear jigs, slightly raise the body.
•
Lower the four jigs until there is a clearance A of 1 to 2 mm between the body and the centre jig.
The body is definitively positioned when the attaching holes are in line with those in the jigs.
•
Firmly secure the jigs to the supporting cross members.
11