Chapter 2. Loading Supplies - Monarch Paxar 9450 RASCAL Operator's Handbook Manual

Chapter 2.
The printer accepts labels, tags, and thermal paper. Labels
can be indexed or non-indexed. They also can have a core or
be coreless. Use synthetic (non-paper) labels to print serial or
high-density bar codes.
You can load supplies two ways:
Before loading supplies, make sure the supply chute is clean.
n
Refer to Chapter 5, "Care and Maintenance."
Peel mode peels the label from the backing paper while
it feeds through the printer. This mode requires
indexed labels. The printer must be in On-demand
mode. A solid green LED indicator implies On-demand
mode. Ask your System Administrator to set the mode,
if necessary.
Non-peel mode feeds without peeling labels from the
backing paper. Use this mode for printing label strips
or printing on tags or thermal paper. The printer must
be in Continuous mode. A solid amber LED indicator
implies Continuous mode. Ask your System
Administrator to set the mode, if necessary.
Loading Supplies
2-1