Table of Contents
Advertisement
9450 Operator's Handbook
2. Squeeze the side tabs on the battery and pull the battery
Loading the Battery
To load the battery:
1. Insert the bottom tabs on the battery into the slots at the
2. Push the top of the battery onto the prongs until the
About Sleep Mode ––––––––––––––––––––––––––––––––––––––––––
When the printer is inactive for a certain period, it goes into
sleep mode to conserve battery power. During sleep mode,
the printer retains all print jobs, but isn't operational.
See your System Administrator to set the time the printer waits
before going into sleep mode. The default is 2 minutes, but it
can range from 10 seconds to 2.7 hours. Your System
Administrator can also disable sleep mode entirely. If sleep
mode is disabled, an F appears on the test label before the
delay time.
To recover from sleep mode, press [On/Off]. The printer takes
100 milliseconds to recover.
Do Not send a print job during this interval. It will be lost.
n
1-6
away from the printer.
bottom of the battery well.
battery snaps into place.
Advertisement
Table of Contents
