Loading a Ribbon
Use a ribbon when printing on thermal transfer supplies.
The 9416® thermal transfer printer automatically detects if a ribbon
is installed when you turn on the printer and switches to thermal
transfer printing mode.
Note:
Make sure the ribbon window and the supply door are
closed when you turn on the printer.
1.
Push down on the ribbon window to unlock it and raise the
window.
2.
The ribbon take-up core should already be on the take-up reel.
Attach the take-up core to the front hub, as shown.
To replace a used ribbon, keep the empty core for use as
the new ribbon take-up core.
Take-up Core
Back Hub
Front Hub
4
Take-up Reel
Ribbon
W indow