High Energy Ribbon Limitations - Monarch 9800 Series Operator's Handbook Manual

H i g h E n e r g y R i b b o n L i m i t a t i o n s
When using the high energy ribbon option:
Use a print speed of 2.5IPS (inches per second).
Printhead warranty is reduced to 100,000 inches.
Serial bar codes cannot be printed.
Do not use peel mode.
No more than 20% of the supply should have print (black
coverage).
The high energy ribbon may break or stick to the
supply when more than 20% of the supply
Only white high energy supply should be used for bar code
printing.
Reverse fonts cannot be used.
A non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.
Do not print horizontal lines or bars.
Graphics are limited.
CAUTION
contains print.
Loading Ribbon 3-7