Adjusting The Wide/Narrow Knobs - Monarch 9800 Series Operator's Handbook Manual

Tear labels against the tear bar.
Tear backing paper against the tear edge.
Tear Edge
Backing Paper
A d j u s t i n g t h e W i d e / N a r r o w K n o b s
You may need to adjust the two wide/narrow knobs according to
the width of your supply. For supply that is more than two inches,
adjust the knobs to the wide setting. For supply that is two inches
or less, adjust the knobs to the narrow setting.
You must adjust both of the knobs to
If you experience ribbon smudging in cold, dry environments,
adjust the wide/narrow knobs to the wide setting.
the same position.
Rev. C 3/99
Loading Supplies 2-9