On-Demand Mode Printing - Monarch 9800 Series Operator's Handbook Manual

P r i n t i n g
The host sends online packets containing print jobs to the printer.
To print:
1. Turn on the printer.
2. Download a format and a batch. Refer to the Packet
Reference Manual for information on downloading print jobs.
The printer prints a strip of labels.
3. Remove the printed labels.
O n - D e m a n d M o d e P r i n t i n g
When the 9820 printer is operating in the on-demand mode, you
must press Feed to print a label. The Paused light blinks when
the label is ready to print.
When the 9830 printer is operating in the on-demand mode, the
next label prints when the previous label is removed from the
printer or when Feed is pressed. The Paused light blinks until all
the labels in the batch are printed. You must use on-demand
printing with peel mode. If you are using peel mode, remove the
excess backing paper by pulling up across the saw-toothed tear
edge. Make sure the backing paper tears at the edge.
4-2 Printing
If the printer will be unused for extended
periods of time, we recommend leaving the
printhead unlatched.
Hold the leading edge of peeled labels when
printing on stock longer than six inches. The
minimum feed length for peel mode is 1.5
inches. You must use non-perforated
supplies for peel mode.