9406 Operator's Handbook
E
2.
Press
E
3.
Press
To change one of these options, follow the instructions under
the correct heading. To exit an option without changing the
setting, press
Ribbon
You can print with or without a ribbon, but you have to tell the
printer which option you want.
The default setting for ribbon is Yes. To change the setting,
follow the steps under "Finding the Supply Options." Then
follow the steps below.
E
1.
Press
previous setting, for example
R
E
2.
Press
press
3-2
. You will see
SETUP
Supply
. You will see the first supply option.
SUPPLY
Ribbon
Q
.
to set the ribbon option. You will see the
RIBBON
<
L
or
until you see the option you want. Then
. You will see
SUPPLY
Ribbon
Yes
>
>
>